1972 Ski-Doo Shop Manual, Page 230Get this manual
4-0102 REMOVAL
(Olympique 300 Model)
BODYFRAME
INSTALLATION (All Models) 1Reverse removal procedure
1Remove retaining clips and hinge rod to remove housing(Olympique 335399 Models) 1Unscrew nut and bolt at headlamp control rodRemove lower hinge and springRemove headlamp assembly (fig4-1-4)
2Proceed with headlamp adjustmentWARNING: Before starting out or after adjust ments, make sure lever andor bolts are securely hooked or fastened
4-1-3 HEAD LAMP ADJUSTMENT (A) Check headlamp adjustment using the fol lowing procedure: 1Position the vehicle twenty-five feet (25 ft from wall or screen
2On manual start vehicles, start the engine3, Switch the lights to ON
NOTE: On vehicles equipped with HiLo beam, this procedure is carried out with the light switch in high beam position
4Check that the center of the headlamp beam