1972 Ski-Doo Shop Manual, Page 159Get this manual
2-05-01 REWIND STARTER
For 1972 there are two (2) rewind starter models, one model incorporating jam pin to lock the starter rope in the sheave the other, utilizing key clampIdentify the model installed on your vehicle and refer to the appropriate service procedureREMOVAL ijlllpl.pinmodel) 1On one cylinder engines, remove plastic sieve from starter housingthe knot4Slide the handle grip and rubber buffer from starting rope5Remove "0" washer and rope sheave from the housing6Unscrew the two (2) screws on the starter stop and remove the stop (fig2-5-2)
2Remove the four (4) screws and washers attaching the reWind starter to fan cowlRemove starter and place it on worktableDISASSEMBLY 1Using small screwdriver, push the circlip holding the cover washer in location (fig251 )Remove circlip, cover washer, friction spring, friction washer and pivoting arm assembly from the housing studStarter stoP