1972 Ski-Doo Shop Manual, Page 112Get this manual
STEERING SYSTEM 5Connect brake and throttle cables and housings to handlebar 1-15-11
6Should the handlebar gripts) be worn or
damaged, replace gripes)INSPECTION Inspect ball joints for wear or looseness, if excessive, replace
l-fH-H' lID
ASSEMBLY (Elan Models) 1Screw one (1) lock nut onto each of the four (4) tie rod endsScrew two (2) tie rod ends into each of the tie rods, ensuring that at least half of the total number of tie rod end threads are screwed into the lower tie rods2
NOTE: The longer tie rod end must be screwed into the lower tie rod (fig1-15-24)
A Spherical bell joints
Vp,rllr'.c
B N_ tab locks
r'IJJr111 fl,-f,l:'
d"l ih{l hJTI,rrjrl:cllllrlf' cf