Polaris 2001 High-Performance Snowmobile Service Manual (PN 9916690), Page 280Get this manual
STEERINGFRONT SUSPENSION STEERING ARM ORENTATION FOR 2001 XCF, 440600 Edge Pro X
WARNING
Forward
Correct
As Close To 90 As Possible
Steering arm orientation is important to ensure proper steering tie rod end thread engagement and steering performanceAlways mark steering arms and spindles before removal for reference upon reassemblyWhen installing new parts or after steering arm installation, refer to the illustrations and text belowAlways verify proper steering operation after completing adjustments or repairs1The steering arms on each spindle should be parallel to slightly inward in relation to each skiWhen correctly installed (Ill1) the centerline of the ski and centerline of the ski bolt hole in the spindle will form (approximately) 90 angle or slightly greater2If the steering arm is installed incorrectly the threads of the steering tie rod end will not engage the tie rod sufficiently, and the angle formed between ski and ski bolt centerlines is considerably less than 90 as shown at right3Reinstall torsion bar linkage (where applicable)Torque attaching bolts to specification