Polaris 2001 High-Performance Snowmobile Service Manual (PN 9916690), Page 191Get this manual

Polaris 2001 High-Performance Snowmobile Service Manual (PN 9916690), Page 191

CLUTCHING Disassembly and Inspection 1Install drive clutch in clutch compression tool (8700220)Mark both moveable and fixed sheave, cover, and spider with permanent markerCAUTION: Sheaves must be marked to provide reference point for clutch balance and spider indexingIf the sheaves are not marked, and spider shim washers are changed or misplaced, the clutch will be out of balance and must be replacedSee page 4.28 for indexing procedure2Carefully and evenly remove cover attaching boltsDo not allow side loading or misalignment of cover or bushing may be damagedRemember there is spring tension on the coverInspect cover bushing for wearSee page 4.43 for inspection and repair procedureDrive Clutch Compression Tool PN 8700220 Drive Clutch Holding Fixture PN 2871358