Polaris 2001 High-Performance Snowmobile Service Manual (PN 9916690), Page 190Get this manual
CLUTCHING Removal
1Hold clutch with strap wrenchRemove drive clutch retaining bolt, grease puller thread and tip lightly and install puller into clutchTighten puller with wrench, or strike t-bar with hammer until clutch is removedStrap Wrench PN 2870336 Clutch Puller PN 287208534-16x14mm Clutch Puller XCF: 2872084
2Slight galling or scoring of bore taper can usually be corrected using tapered reamerPlace reamer in vise and lubricate with cutting oilClean clutch taper by manually rotating clutch clockwiseDo not ream taper more than required to remove galling or scoringNever use power tools to ream taper of drive clutch