Polaris 2001 High-Performance Snowmobile Service Manual (PN 9916690), Page 52Get this manual
GENERAL INFORMATION Track and Traction CAUTION: Avoid placing studs too close to the edge of the track or track damage andor failure may occurBe sure to use good grade of Loctite (for example high strength red), and allow curing time of at least 24 hoursWhen possible, burn holes in the track with 14 awlThis helps seal the holes and keep moisture outIf you do not burn the holes, use hole cutterNever use drill bitThe cords will rip and make studding very difficult