2013 600 IQ Racer Service Manual 9923892, Page 68Get this manual
Engine and Cooling Systems 12Remove the fastener that holds the torque stop to the engine plate23Remove the engine from the clutch side of the chassis
Installation
The following instructions is for an engine that is assembled with the engine mounting plates attached and the spark plugs and PTO EV assembly removed
13Disconnect the spark plugs14Drain all coolant from the engine15Remove the lower center front cooling hose16Remove the hose from the top of the thermostat17Disconnect the impulse line from the crankcase18Remove the recoil handle and secure the recoil rope19Disconnect the EV solenoid, water pump sensor, regulator rectifier and stator connections20Remove the PTO EV assembly from the engine2Apply Loctite 242 to the threads of each base fastener on the PTO EV and torque to specification1From the clutch side, place the engine into the chassis and onto the motor mounts