2013 600 IQ Racer Service Manual 9923892, Page 36Get this manual
Maintenance ELECTRICAL SYSTEMS
Headlight Bulb Replacement
NOTE: Do not touch the bulb with your fingersThe grease from body oil will cause hot spot on the bulb and cause bulb failureIf you do touch the bulb clean the bulb with isopropyl alcohol1Push in on the "PUSH" section of the plenum2Slide the access panel down to gain access to the bulb3Squeeze and move the bulb clip up4Replace the bulb, clip and access panel
Electrical Connections
Separate electrical connector blocks and clean corrosive build-up from connectorsLubricate or pack connector blocks with NyogelTM grease and reconnectReplace worn or frayed electrical wire and connectors
CarburetorThrottle Body
Fog engine with Polaris Fogging Oil (aerosol type) according to directions on can