2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 405Get this manual
Battery and Electrical Systems DIAGNOSTIC PLUGS
Power Test Plugs DC PWR Plug
Connect the Chassis Power-Up Harness to the DC PWR plug to supply battery power to the following components: Instrument cluster DC accessory power points LED tail lampbrake lamp FUEL PUMP PRIME
ECM PWR Plug
Connect the Chassis Power-Up Harness to the ECM PWR plug to supply battery voltage to the following components: Digital WrenchTM communication connector ECU Chassis relay driver coil VES solenoid DC Power capacitor Fuel pump power side
A set of power test and fuel pump prime plugs allows technician to test several electrical circuits on the snowmobileThe plugs can be accessed behind the left door panelNOTE: The AC power test plug is located on the handlebar wiring harness on 2011-later modelsShown below is the Chassis Power-Up Harness, PS-47269-A, and Dual PowerFuel Pump Prime Adapter, PS-50805When both tools are used together, the technician can supply power to the ECM PWR and DC PWR plugsThis is required for enabling the security function on 2012 modelsAlso, the Dual PWRFuel Pump Prime Adapter can connect to the fuel pump prime plugCHASSIS POWER-UP HARNESS PS-47296-A