2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 389Get this manual
Battery and Electrical Systems Security System: Changing Passcode
To change the current security code to new code, perform these steps: NOTE: The instrument cluster illustrations on the following pages reference the 000 default security codeUse the owner's current security code1Start the engine and lock the parking brake2Lock and then unlock the security function on the instrument cluster using the existing passcode3Immediately after unlocking security, press and hold the MODE button to display the ENTER CODE screen SELAdvances up digit (0 to to 0) MODEEnter and move digit to right 4When ENTER CODE displays, use the MODE and SEL buttons to select and accept each digit of the new security code5After pressing MODE to accept the third digit, the new code and CODE SET will display if the system accepted the new codeIf successful, this screen will not be displayed again