2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 384Get this manual
Battery and Electrical Systems Security System: Digital WrenchTM Passcode Reset
If the three digit passcode is either lost or unknown, it can be reset to 000 using Digital WrenchTMThe ECU and instrument cluster must be powered at the same timeThis can be done by either starting and running the engine in well-ventilated area, or with the chassis power-up harness and dual power-up adapterSteps and can be eliminated by performing the procedure with the engine runningWhen using the chassis power-up harness and dual power-up adapter to reset the password, follow these steps: 1Open the left side engine compartment door and locate the Digital WrenchTM diagnostic plug, ECU power plug, and DC power plug3Start Digital WrenchTM on the PClaptopnavigate to the appropriate vehicle home pageSelect OPTIONSECURITY FUNCTIONS from the Special Tests (Red Toolbox) Menu