2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 295Get this manual
Steering and Suspensions DISASSEMBLY AND ASSEMBLY
Spindle Removal
1Securely support the front of the machine up off the floor2Remove the ski(s)3Remove the upper control arm (UCA)-to-spindle fastener4Remove the fastener securing the lower control arm (LCA) to the spindleNote the orientation of the fastener and nut5Remove the tie rod from the spindle, by removing the nut and bolt
UpperLower Control Arm Removal
1Remove the fastener securing the control arm to the spindleRemove the lower shock fastener2Remove the nuts securing the control arm to the bulkhead3Remove the control arm, pivot bushings, and pivot shafts
UpperLower Control Arm Installation