2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 292Get this manual
Steering and Suspensions FRONT SUSPENSION SETTINGS
Overview
The following topics are outlined involving the front suspension: Maximum Width Handlebar Centering Setting Camber Ski Toe Adjustment
Maximum Setup Width
The maximum width setting is the distance between the front center lines of both spindles with the skis off the ground and the shocks installedBecause of the design of the front suspension, maximum width can only be changed by adjusting camberThis is due to the fact that only the upper control arms feature rod ends and thus camber can only be adjusted by turning the upper control rod ends in or out1To measure the maximum setup width, raise the front of the snowmobile off the ground with the shocks and skis installed2Center the skisspindlesMeasure the distance between the spindle center lines