2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 270Get this manual
Steering and Suspensions Front Suspension Type by Model
FRONT SUSPENSION MODELS
CamberToe Specifications
Maximum width and camber measurements are achieved with the front end elevated and shocks at full extensionToe alignment is measured at ride heightThis means that the machine is on the ground and resting at normal ride height, not full reboundMeasure at point 10" (2.54cm) forward of the ski mount bolt and 10" (2.54cm) behind the ski mount bolt, preferably on the center line of the carbide skagsMaximum width is measured from the center of the spindlesCamber measurement is taken from the top of the alignment bar to the top of the ski mount hole in the spindle with the bushing removedNOTE: Only models featuring upper control arms with rod ends allow for adjusting camber
Pro-Ride Pro-Ride (Fixed Camber)