2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 210Get this manual
Final DriveBrake System 2Remove the caliper from the chaincaseTie the caliper to the overstructureDo not allow the brake caliper to hang from the brake hose
Phantom Brake Caliper Piston and Seal Replacement
Phantom Brake Caliper Installation
1Apply Loctite 242TM and replace caliper bolts, and silencer bracket or washers if equippedTorque bolts to specification
Caliper Bolts: 40 ft-lb (54 Nm) 2Place the brake line on the caliper in the same orientation as it was before it was removed3Clean the threads of the banjo bolt and the threads in the caliper4Follow Brake Line ReplacementSee "Brake Line Replacement" on page 5.185Install banjo bolt into the caliper and torque it to specification6Bleed the brakesSee "Brake Fluid ReplacementBleeding" on page 5.167Test brake system prior to returning vehicle to serviceCALIPER BORE PLUG DO NOT PUSH OR MOVE! PISTONS