2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 207Get this manual
Final DriveBrake System Combined Master CylinderLever Service
COVER SCREWS
PARKING BRAKE LEVER
LEVER PIN
8SWITCH
9CARTRIDGE CLIP BRAKE LEVER
Remove the parking brake leverTo remove the cartridge, completely drain the brake fluid from the housingRemove the brake and parking brake leversDisconnect the brake hose from the cartridgeCarefully pop the cartridge out of the housingTo install the cartridge, lubricate the entire surface with DOT brake fluidAlign the cartridge with the housing tabs, then firmly press the cartridge back into the housing until the cartridge is engaged with the tabsRefill and bleed the brakes system as outlined in this chapterSee "Brake Fluid ReplacementBleeding" on page 5.16Test brake system prior to returning vehicle to service
Cyclone Master CylinderLever Service
COVER SCREWS
CLAMP SCREWS
Swtich Pack Screw LocationTorque Sequence:
#10x.75 SCREWS LEVER PIN