2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 197Get this manual
Final DriveBrake System Chaincase Disassembly
1Remove the left and right door panelsRemove the screw securing the right lower fender to the chassis2Remove the hood assembly3Remove the exhaust silencer4If equipped with electric start, remove the battery and battery box9Remove the brake disc from the jackshaftReference table for brake disc hardwareYEAR CALIPER TYPE
BRAKE DISC FASTENER HARDWARE
2010 Phantom
CAUTION
Remove the RED (+) battery cable first, and then the BLACK (-) cable lastReverse order when attaching cables to battery5Place drain pan under the chaincaseRemove the plug to drain the oilClean the plug threadsVerify the o-ring is not damaged6Reinstall plug and torque to specification
Fastener: 29 ft-lb (40 Nm) Flat Washer 1-2 Float Washers (Install QTYto achieve .8mm Disc Float)
Fastener: 40 ft-lb (54 Nm) 2011-Current Flat Washer Phantom Wave Washer Float Washer 2011-Current Fastener: 40 ft-lb (54 Nm) Phantom Lite Domed (Beveled) Washer (Dome facing out