2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 179Get this manual
Cleanfire Fuel Injection TPS Tests
Two tests can be performed to quickly determine if further testing is requiredTEST 1: TPS Idle Voltage 1Connect Digital Wrench to the vehicleConfirm the throttle lever free play is set to specification, and the throttle cable is not pulling on the throttle plate cam2Click on the DATA GRID ICON to view the current sensor readings3Locate the TPS VOLTAGE reading and compare it to the specification for the vehicleVerify SENSOR REFERENCE VOLTAGE is 4.9-5.0 VDCTPS Idle Base Setting Voltage
MODEL SPECIFICATION
600 DC-CFI Engine 800 DC-CFI Engine TEST 2: TPS Signal Sweep