2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 151Get this manual
Cleanfire Fuel Injection Engine Coolant Temperature Sensor Throttle Body Removal
Sensor Specifications
Operating Temperature Range Resistance Installation Torque -22_F+248 _F (-30_C120_C) 2.42.6K 68_F (20_C) (Measure in stirred water) 29 ft-lb (39.2Nm)
1Remove the oil tankclutch cover assembly2Remove the airbox assembly3Pinch off the coolant lines with the hose pincher tool PN PU-451494Remove the coolant hoses from the throttle bodyDisconnect the TPS harness connector5Loosen the intake boot clamps and pull the throttle body upwardLocate the oil pump linkage armPop the rod end off the throttle body cam6Loosen the throttle cable lock nut and remove the cable from the throttle body7Remove throttle body8During installation, verify the oil pump lever is not rotated over-center before installing the linkage arm on to the throttle body