2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 150Get this manual
Cleanfire Fuel Injection 2Insert the blade of .030" feeler gauge between the rib and sensor faceIf there is no drag felt on the feeler gauge, the CPS must be adjusted3To adjust CPS, use inch pry bar to carefully deflect the sensor4Place the tip of the small pry bar between the back of the sensor and crankcaseinsert .012" feeler gauge between the sensor face and encoder ribIMPORTANT: Do not pry on the individual sensor wires
Exhaust Valve Solenoid
Specifications
PRY BAR FEELER GAUGE
Coil Resistance (WHTYEL to RED)
15 +- 15 68F (20C)