2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 149Get this manual
Cleanfire Fuel Injection Exhaust Temperature Sensor Crankshaft Position Sensors (CPS)
The tooth crank position sensor picks up all flywheel teeth and determines the following: Judge direction of rotation (forward and backward) Ignition advance angle control Injector drive angle control Excess advance ignition control at reverse MAGPTO cylinder detection
Sensor Specifications
Resistance Values 2.3M 392_F (200_C) 76 1652_F (900_C)
Exhaust Temperature Sensor Torque: 32 ft-lb (44 Nm)
The tooth crank position sensor picks up flywheel teethIt detects the crank angle and obtains minimal information of the crank angle when control enters into limp home mode The sensors must be in the correct position or the engine will not runA sheared flywheel key will cause the engine to not start or to shut off (misfire)