2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 121Get this manual

2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 121

EngineCoolingExhaust 16Reinstall the steering drag link with the rod ends parallel to each mating surfaceTorque nuts to specificationNOTE: Install the silencer mount rubber dampener with the fat end facing outwards
Steering Drag Link Rod End Nuts: 37 ft-lb (50 Nm) 17If the snowmobile is equipped with electric start, reinstall the battery and reconnect the battery cablesConnect BLACK negative (-) cable first, and then RED positive (+) cable lastSILENCER MOUNT

CAUTION
Attach the BLACK (-) battery cable first, and then the RED (+) cable last18Reinstall the exhaust silencerVerify the silencer outlet tube is installed in the fender boot and that the boot has not been pushed out of the fender19Torque the silencer rubber mount fastener to specification