2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 119Get this manual
EngineCoolingExhaust 16Remove the exhaust y-pipe from the engine using ball-end Allen wrenchRemove the exhaust gasketsIf un-damaged, they can be re-used during assembly19Remove the two engine mount screws from the MAGside of the engineNOTE: Use six to eight inch extended Allen wrench to access the MAG-side engine mounting bolts
17Remove the PTO and MAG exhaust valve assemblies from the cylinderDoing this will provide clearance between the engine and bulkhead so the engine can be removed from the PTO-side of the engine compartment18Remove the two engine mounting screws from the PTO-side of the engine