2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 102Get this manual
EngineCoolingExhaust Engine Mount Bolt Service Replacement Kit
A service kit has been developed to replace the original engine mount fastener bolts used on 2010-2011 600800 Pro-Ride vehicles to the 2012 fastener specificationIMPORTANT: It is recommended that all engine mount bolts be replaced if removedIf bolt replacement is not possible, the bolt(s) must be replaced after TWO installation cyclesIt is recommended that the technician marks the bulkhead to count the number of installations at each bolt(s) location
Engine Mount Bolt Replacement Kit PN 2204633
The engine mount bolt replacement kit includes the following parts: PN 75193344QTY- Bolts-M10X1.5X50 12.9 PN 30224262QTY- Radial Inserts (Small) (600800sFront PTO2010-2011 600s Rear PTO ONLY) PN 3022409QTY- Radial Inserts (Large) (600800sMAG Front and Rear2011 800 Rear PTO) The engine mount bolt replacement kit will replace all four engine mount bolts along with their associated radial insertsThe original bolts (part numbers: 7519009 and 7519282) will sub to the 2204633 kit part numberBolt identification can be quickly made by measuring the head diameter of the boltBolts used on 2010-2011 ProRide vehicles have 14mm head diameters, while the replacement bolts have 16mm heads and feature knurled edge