2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 77Get this manual
Maintenance STEERINGSUSPENSION MAINTENANCE
Handlebars
Periodically inspect the torque of the handlebar clamp fasteners3Adjust handlebars to desired positionVerify the wiring harness, brake hose, and throttle cable do not kinkNOTE: Verify "FWD" printed on riser faces front of snowmobile 4Secure the front clamp fasteners first to specificationFinish by securing the two rear clamp fasteners to the same torque settingHANDLEBAR
Handlebar Clamp Fastener Torque:14.7 ft-lb (20 Nm) 5Reinstall the handlebar cover if equipped
RISER ("FWD" FACES FRONT)
Adjustable Riser
Periodically inspect the torque of the upperlower handlebar clamp fasteners, and slide fasteners