2010-2012 PRO-RIDE RUSH Switchback RMK Service Manual, Page 62Get this manual
Maintenance Oil TankClutch Cover Service
The oil tank is mounted to the clutch cover assemblyThe oil tankclutch cover assembly can be removed from the vehicle to access components within the engine compartmentNOTE: Because of the relative ease of removing both the oil tank and clutch cover at the same time, both processes have been combined although not all service procedures will require the removal of the clutch cover1Open the engine compartment door panels, and remove the hood2Remove the hood assemblyFILL LEVEL SENSOR OIL CAPECU BRACKET
11Installation is the reverse of removalAfter installing the supply hose on to the filter and installing the clamp, hold the oil tank high in the engine compartment with the supply hose pointed down to allow the trapped air to bleed upwards into the tank
CAUTION
Verify the oil supply hose is not kinked after installing the oil tankoil supply hose12Install the ECU bracket, and fill cap13Torque the lower tank screw to specificationInstall the rubber strap