2007 Polaris Two Stroke Snowmobile Workshop Repair manual, Page 182Get this manual
FINAL DRIVEBRAKES WIDETRAK TRANSMISSION
Removal
123456Hood can be removed to prevent damageMark hood hinges for ease of alignment when reassembling unitRemove batteryTurn off fuel valveMove oil tank for accessRemove air intake and coolant recovery bottle from its mountingdo not remove entirely)Remove drive beltRemove driven clutch retaining bolt assembly and drive clutchNote number of spacers which are behind driven clutch for installation during reassembly proceduresRemove muffler springs and muffler from unitLoosen brake cable jam nut (1) and remove cable bolt, nut and spacer (2Use care not to lose spacer13Loosen jam nuts on adjustment bolts on both sidesBack out adjustment bolts to allow rear idler assembly to come forward, relieving track tension14Tighten idler wheel bolts so that spacers on shafts do not rotate and lose alignment15Remove carrier shaft bolts (4), and front (5) and rear suspension bolts (6) from both sides