2007 Polaris Two Stroke Snowmobile Workshop Repair manual, Page 178Get this manual
FINAL DRIVEBRAKES 17Install the driveshaft by replacing the flangette nuts on the speedo drive sidetorque to 19-21 ft-lb (26-28 N-m)30Install the chaincase cover, and torque the cover bolts to 10 ft-lb (13.5 N-m)
Speedo Drive Flangette Nuts: 19-21 ft-lb (26-28N-m) 18Replace the speedo drive cover19Torque the speedo drive cover nuts to 11 ft-lb (1 5N-m)
Chaincase Cover Bolts: 10 ft.lb(13.5 N-m) 31Remove the fill cover and fill chaincase to the appropriate level32Check for leaks33Adjust track tension to the specified tension34Install the LH storage compartment into the LH footwell area35Insert the lower tabs on the cowling in the LH footwell36Replace the TorxTM screw that holds the cowling onto the steering hoop