2007 Polaris Two Stroke Snowmobile Workshop Repair manual, Page 142Get this manual
ENGINE 39Connect the EV solenoid vent lines back onto the EV bases and install the panduit strap (21) around the spark plug wires as shown42Replace the nosepan plugs were removed to access the front chassis brace fasteners43Route the recoil rope through the eyelet on the chassis brace and secure handle once past the console44Install the exhaust system45Add coolant and bleed systemSee "Cooling System Bleeding" on page 3.746Premix the first tank of fuelSee "2 Stroke GasolineOil Pre Mix" on page 2.747Test run the unit and clear any codes with Digital Wrench48After test running check drive and driven clutch torque