2007 Polaris Two Stroke Snowmobile Workshop Repair manual, Page 141Get this manual
ENGINE 26Install the front torque stop assembly and torque the plate fasteners to specificationNOTE: The WHITE connector (17) goes to the MAG coil (upper)The BLUE connector (18) goes to the PTO coil (lower)
Front Torque Stop Fasteners: 28 ft.lb (37.9 N-m) 27Install the air box (13) onto the carb rackMake sure to line up the air box tabs with the air box plate (14)
37Connect the regulator rectifier connections (19)
28Install the drive clutchSee "Drive Clutch Installation" on page 6.2029Install the driven clutchSee "Driven Clutch Installation" on page 6.2130Install the beltSee "Drive Belt Installation" on page 6.1031Hook up the fuel filter and fuel return line by pushing them together until you hear audible "click"32Secure the fuel return line "P" clamp (15) onto the side of the airbox33Place the fuel filter back into the holder (16) that is on the airbox