2007 Polaris Two Stroke Snowmobile Workshop Repair manual, Page 140Get this manual
ENGINE 21Place the engine mount washers and fasteners (8) onto the engine mount studsTorque to specification23Apply Blue LoctiteTM to the rear fasteners (10), install all the rear torque stop fasteners and torque to specification
Engine Mount Fasteners: 28 ft.lb (37.9 N-m) 22Install the right hand chassis brace (9)
Rear Torque Stop Fasteners: 28 ft.lb (37.9 N-m) 24Adjust the rear torque stop so that you have clearance of .010"-.030" (.25-.75mm) from the face of the torque stop to the surface of the engine