2007 Polaris Two Stroke Snowmobile Workshop Repair manual, Page 139Get this manual
ENGINE 10Using 10mm open end wrench tighten the lock nut while holding the other nut with 10mm open end wrenchMake sure that the oil cable angle is tilted slightly toward the engine (2)15Secure the oil bottle to the chassis by installing the two torx fasteners located at the top of the bottle (14)
11Thread on the adjuster nut and adjust the oil pump and adjust the oil pumpSee "Oil Pump Adjustment" on page 3.1912Carefully place the engine into the engine compartment and line up the engine mount studs with the engine straps on the engineNOTE: Make sure that all hoses, lines and wires are not pinched or interfere with installation13Route the oil supply line from the engine through the hose guide14Install the oil bottle and hook up the supply line (3)Open and slide the hose clamp onto the hose and oil bottle fittings