2007 Polaris Two Stroke Snowmobile Workshop Repair manual, Page 123Get this manual
ENGINE 20Move the hose clamp (7) and remove and secure it out of the way24Remove the inside motor mount fastener (12), located under the PTO carburetor boot
21Remove the coolant supply hose that is located at the bottom of the coolant bottle and secure it out of the wayThis will come out with the engine22Remove the rear (9) and left (10) motor mount nuts located on the right hand side of the engine
25Remove the rear torque stop plate26Remove the engine isolator limiter assembly fasteners (13) and then remove the torque stop assembly