2007 Polaris Two Stroke Snowmobile Workshop Repair manual, Page 75Get this manual
MAINTENANCE Engine Isolator Limiter Setting
Adjust the front engine isolator limiter so that the stop (D) is bottomed out on the brace (E)Hold the engine isolator limiter (D) and torque the jam nut (F) to specificationNOTE: Do not adjust this engine isolator limiter as torque stop or damage may occurThe approximate distance from the face of the isolator to the face of the engine strap is 0.107" (2.72mm)F E
Water Sediment Trap WARNING
When draining the traps, fuel spillage will occurBe sure to work in well ventilated area away from anything which may cause the fuel to ignite such as an open flame, heaters, trouble lights or cigarettesMost Polaris snowmobiles incorporate patented carburetor bowl watersediment traps located at the bottom of each carburetorThe trap consists of hose with plug which should be inspected for contamination every 1000 miles (1600 km)A B
D Isolator Limiter touching base 123Turn the fuel tank supply valve to the "OFF" positionPosition container or shop towels under the work area to help catch some of the contaminated gasolineSlide the clamp (A) away from the drain plug (B) and remove it from the sediment tube and drain the contaminated material from the bowlRepeat for each carburetorWipe off the residue from the plug and reinstall the clamps