2007-2011 Polaris IQ Snowmobiles Service Manual, Page 459Get this manual
Chassis Decal Installation
All decals should be applied indoors, free from dust, dirt, cold air, and humidityRoom temperature must be between 40_ and 100_F (438_C)These decals are to be applied dry1Make sure the surface area of the hood where the decal is to be placed is free of any dirt, debris, or adhesive5When finished installing the decal, carefully remove the decal mask at 180_ angle
2Place the decal in the area to be installed and make sure that everything lines up properly3Carefully peel away the adhesive side of the decal4Apply the decal and slowly work the decal down using clean squeegee to lay the decal straight and to avoid creating air bubblesDo NOT remove the decal mask until the decal is fully applied