2007-2011 Polaris IQ Snowmobiles Service Manual, Page 354Get this manual
Steering and Suspensions Camber
On snowmobile, camber is the angle of the spindle relative to vertical as viewed from the frontThe camber angle becomes increasingly more negative as the control arms deflect upwardNeutral CamberThe spindle is perpendicular to the ground= Positive CamberThe top of the spindle is canted outward from the chassis= Negative CamberThe top of the spindle is canted inward towards the chassis04Insert the alignment bar, PN 5333508 or equivalent, through one spindleAdjust the opposing spindle's upper control arm rod end to adjust the angle of the spindle5Check the measurement between the top-end of the alignment bar and the top of the spindle's bushingski bolt hole (see illustration below)UPPER CONTROL ARM ROD END NUT
BUSHINGBOLT HOLE
CAMBER SETTING DISTANCE ALIGNMENT BAR
Camber Adjustment