2007-2011 Polaris IQ Snowmobiles Service Manual, Page 333Get this manual
PVT System Clutch Assembly
1Assemble the rollers, bushings and roller pins if they were removed2Install the head of the weight pin so that it is on the leading side of rotationThis will orientate the nut on the trailing side of rotation3Torque weight pin to 30 in-lb(3Nm)9Apply Loctite 242 to shaft threadsDo not get Loctite on moveable bushing.Install the jam nut onto the shaft and torque it to specification
Spider Jam Nut Torque Flat Clutch Cover225-250 Ft.Lbs(305-399 Nm) Raised Clutch Cover290-310 Ft.Lbs(393-420 Nm) Apply Loctite 242 to Threads10Place the drive spring on the shaft11Place the cover onto the clutch and torque the cover fasteners to specification
Weight Pin Torque 2030 In.Lbs(2.23.4 Nm) 4Place the moveable sheave onto the stationary sheave5Place the same number of spacers on top of the stepped spacer onto the shaft of the stationary sheave