2007-2011 Polaris IQ Snowmobiles Service Manual, Page 275Get this manual
Engine and Cooling Systems 37Install the electrical centerbelt holder over the electrical center by aligning the rear buttons to the rear of the clutch cover and installing the two fasteners
COOLING SYSTEMS
Thermostat Replacement
BLEED SCREW WASHER
38Install the Nylock nuts and two T40 Torx bolts to the front and the two T40 to the rear of the LH and RH chassis brace and install the bracesNOTE: Install the long bolts and the spacer on the front portion of the bar before inserting it into the mounting area
HOUSING COVER
THERMOSTAT