2007-2011 Polaris IQ Snowmobiles Service Manual, Page 201Get this manual
Fuel Systems NOTE: The guard may need to be "flexed" to align the holes with the TPS fasteners1Click on the TOOLBOX icon2Select: "OPTIONTPS SETUP"3Select: "OPTIONFULL PROCEDURE"TPS FastenersTPS Harness Connector 8Remove the throttle cable from the throttle leverTurn the inline adjuster in clockwiseVerify the throttle cable is not pulling on the throttle plate cam9Digital Wrench will communicate with the ECU to determine if the TPS zero offset is set correctlyIn order to measure the zero offset, the idle speed screw must be backed-out so it no longer makes contact with the throttle stop