2007-2011 Polaris IQ Snowmobiles Service Manual, Page 142Get this manual
Maintenance NOTE: The oil pump jam nuts can be manipulated using the special tool set part number: PS-49001 (Oil Pump Cable Wrenches)10If the oil pump lever requires adjustment or the cable is going to be replaced, insert the two oil pump cable wrenches between the bulkhead and the rear of the engineNOTE: The wrench with the large opening is designed to fit around the cable sheath, while the wrench with the small opening is designed to fit around the inner cable wire
Oil Pump Bleeding
WRENCHES
1Verify oil tank is filled with oil2Loosen the bleed screw (A)Verify stream of oil flows from the bleed screw3After bleeding oil pump, secure bleed screw and wipe up oil residueNOTE: Any time that the engine is disassembled or repaired, it is important to purge air within the hoses and oil pump
600 IQ Widetrak Self-Bleeding Oil Tank