2007-2008 Polaris IQ Snowmobiles Service Manual, Page 156Get this manual
Engine and Cooling Systems 10Using 10mm open end wrench tighten the lock nut while holding the other nut with 10mm open end wrenchMake sure that the oil cable angle is tilted slightly toward the engine15Secure the oil bottle to the chassis by installing the two torx fasteners located at the top of the bottle
11Thread on the adjuster nut and adjust the oil pump and adjust the oil pump12Carefully place the engine into the engine compartment and line up the engine mount studs with the engine straps on the engineNOTE: Make sure that all hoses, lines and wires are not pinched or interfere with installation13Route the oil supply line from the engine through the hose guide14Install the oil bottle and hook up the supply lineOpen and slide the hose clamp onto the hose and oil bottle fittings