2007-2008 Polaris IQ Snowmobiles Service Manual, Page 151Get this manual
Engine and Cooling Systems 8gasketTo remove the oil pumpcover, remove the two fasteners then pull the pumpcover out of the crankcase boreDiscard the gasketThe cross shaft can be extracted from the water pump side of the crankcase10Assembly is the reverse of disassemblyAlways use new o-rings, seals and gaskets during assembly11Install new seal onto the shaft from the water pump side12To install new water pump seal, use the seal installation tool, PN 2872010Verify the seal lips are facing the cross shaft gear600700800 CFI Oil Hose Routing