2007-2008 Polaris IQ Snowmobiles Service Manual, Page 115Get this manual
Fuel Systems DIGITAL WRENCH DIAGNOSTIC SOFTWARE
Overview
The Digital Wrench diagnostic software allows the technician to perform the following tests and observations: Viewclear trouble codes Analyze real-time engine data Reflash ECU calibration files Guided diagnostics Create customer service account records The following components are required to use the Digital Wrench software: PC or laptop with Microsoft Windows operating system Digital Wrench software, part number PU-47063 Smart Link Module, part number PU-47468 Interface Cable, part number PU-47469 PC Interface Cable, part number PU-47470 Smart Link Module Kit (Includes PU-47468, PU-47469, and PU-47470 in one kit), part number PU-47471 M-10 ACEECU-Chassis Power-Up Cable, part number PA-46355 12-volt battery Follow these steps to connect the diagnostic and power-up cables to the snowmobile: 1Assemble the Smart Link cables and module as shown in the illustration2Open the hood and locate the connectorsRemove the protective cap from the diagnostic connector3Connect the vehicle interface cable to the diagnostic connector4Using the power-up cable, part number PA-46355, and fully charged 12-volt battery, connect the power-up cable to the ECU connectorNOTE: To verify the 12-volt battery and power-up cable are working, connect the cable to the chassis power-up connectorIf working correctly, the headlights should illuminate