2007-2008 Polaris IQ Snowmobiles Service Manual, Page 114Get this manual
Fuel Systems 8Using the PFA spanner wrench and nut socket (PS-48459), carefully remove the PFA nut16Using the PFA spanner wrench and nut socket (PS48459), tighten the PFA to specification
PFA Nut Torque21 Ft.Lbs(28 Nm) 17Fuel tank installation is the reverse of removalAlways test the PFA gasket seal before tank installation by performing pressure check
Throttle Body Removal
123Carefully extract the PFA out of the tank making sure the float and fuel hoses do not become kinked or bent10Remove the old gasket and destroy945Remove the air boxRemove the throttle body air box adapterPinch off the coolant lines with the hose pincher tool PN PU-45149Remove the coolant lines from the throttle bodyLoosen the intake boot clamps and pull the throttle body upward, enough to gain access to the throttle cable and TPS connectorLoosen the throttle cable lock nut and remove the cable from the throttle bodyDisconnect the TPS from the throttle bodyRemove throttle body