2007-2008 Polaris IQ Snowmobiles Service Manual, Page 95Get this manual
Fuel Systems Diagnostic Trouble Codes (DTCs) CFI Diagnostic Trouble Codes
TROUBLE CODE Throttle Position Sensor Unrealistic Transition Throttle Position Sensor Voltage High Throttle Position Sensor Voltage Low Engine Coolant Temperature Sensor Voltage High Engine Coolant Temperature Sensor Voltage Low Intake Air Temperature Circuit Voltage High P-CODE P0120 P0123 P0122 P0118 P0117 P0113 MFD BLINK CODE DESCRIPTION TPS signal changes too rapidly to be correctCan be caused by faulty connections or faulty TPSTPS signal is above 4.39 VdcCan be caused by faulty wire connection or faulty TPSTPS signal is below 0.7 VdcCan be caused by faulty wire connection or faulty TPSSensor signal is above 4.8 VdcCan be caused by faulty wire connection or faulty temperature sensorSensor signal is below 0.1 VdcCan be caused by faulty wire connection or faulty temperature sensorSensor signal is above 4.9 VdcCan be caused by faulty wire connection or faulty TBAPSensor signal is below 0.19 VdcCan be caused by faulty wire connection or faulty TBAPSensor signal is above 3.23 VdcCan be caused by faulty wire connection or faulty TBAPSensor signal is below 1.25 VdcCan be caused by faulty wire connection of faulty TBAPSensor signal is above 4.9 Vdc for at least minutes and the engine has been running at or above 3000 RPMSensor signal is below 0.06 Vdc for at least minutes and the engine has been running at or above 3000 RPMEngine speed is above 6000 RPM and the sensor signal is above 4.3 Vdc for at least secondsEngine speed is above 6000 RPM and the sensor signal is below 1.23 Vdc for at least secondsSolenoid control circuit is OPENCan be caused by faulty wiring, solenoid, or ECU