2007-2008 Polaris IQ Snowmobiles Service Manual, Page 67Get this manual
Maintenance NOTE: Some 2008 600 and 700 CFI engines were manufactured with model year 2007 oil pumps (PNs 2520552 and 2520622)Always reference the oil pump adjustment chart to determine the oil pump lever setting based on the oil pump and not the engine model yearAll service parts will be the 28mm wPointer oil pumps
WRENCHES
CAUTION
Failure to properly set the oil pump lever arm may cause severe engine damage3Remove the air box, throttle body adapter plate, drive belt, drive clutch and driven clutch from the engine compartmentRemove the rear engine torque stop plate from the bulkhead the bulkheadRemove the left-hand console mounting screws and electrical center cover pieceRemove the rear lower clutch guard mounting screws and forward mounting nuts and plateRemove the screws securing the lower clutch guard to the upper plate leaving the electrical center components in placeLoosen and remove the throttle body assembly and set asideUsing mirror or bore scope and light, visually inspect the current oil pump setting