2006-2008 Polaris Snowmobiles FS/FST Service Manual., Page 273Get this manual
Chassis 6Once all of the adhesive is removed from the decal area, follow with cleaning solution of 99 water to mild dishwasher detergentUse non-abrasive cloth with the solution to remove dirt, grease, cleaning solvent, and finger printsAlways clean the surface where the decal will be appliedthe decal is fully applied
CAUTION
ONCE THE ADHESIVE STICKS, IT CAN BE VERY DIFFICULT TO PULL THE DECAL BACK OFF OF THE HOODUSE EXTREME CARE! IF YOU ENCOUNTER AIR BUBBLES DO NOT ATTEMPT
TO USE STRAIGHT PIN TO POKE THE BUBBLE AND LET THE
CAUTION
It is extremely important to remove all traces of dirt and debris from the hood where the decal is to be appliedLeft over debris will be magnified through the chrome decals
AIR OUTA HOLE POKED IN CHROME DECAL WILL BE VERY NOTICEABLEWhen finished installing the decal, carefully remove the decal mask at 180_ angle
Decal Installation