2006-2008 Polaris Snowmobiles FS/FST Service Manual., Page 214Get this manual
Front SuspensionSteering Example: .4375" (11mm) rod end (A)minimum thread engagement (B) .875" (22mm)67Once the specification is achieved, tighten all jam nut(s) and torque them Ft.Lb(61 Nm)Re-check the set up width and compare to specification
Handlebar Centering
123Raise the front of the machine off the floor so that the spindles are off the floor 3"(7.62cm)Insert the alignment bar through both ski bolt holes in each spindlesAdjust Toe until handlebar is centered
Toe Adjustment
A Toe is adjusted with the shocks and skis installedTrack alignment must be correct before starting this processToe alignment is measured at ride height