2006-2008 Polaris Snowmobiles FS/FST Service Manual., Page 111Get this manual
EFIIgnition Systems DIGITAL WRENCH CONNECTIONS
Ignition Switch Jumper Tool
To establish and maintain communications with the ECU, the ECU must be powered and remain powered when connected to Digital WrenchInstalling the jumper tool on the ignition key harness provides constant power source for the ECU
Digital Wrench Diagnostic Cable Connection
12Verify the safety slap switch is downConnect the communication cable, PN PU-47151, to the four-pin (WHITE) diagnostic connectorThe connector is located under the steering loop bracket in the engine compartment
CAUTION